How to Align Axle on Torque Sensor Motor
Applies to Models with PowerStorm MBB with Torque Sensor
The Axle only fits in the motor in one specific orientation, make sure the axle seats all the way in, if it’s not in the right orientation it will not seat and tightening the crank arm will damage parts.
![](https://support.optibike.com/wp-content/uploads/2024/07/torque-sensor_axle_alignment_1-4-1024x768.jpg)
Spline on Motor.
![](https://support.optibike.com/wp-content/uploads/2024/07/torque-sensor_axle_alignment_1-3-768x1024.jpg)
Spline on Axle.
![](https://support.optibike.com/wp-content/uploads/2024/07/torque-sensor_axle_alignment_1-2-768x1024.jpg)
Axle not seated properly, does not stick through far enough.
![](https://support.optibike.com/wp-content/uploads/2024/07/torque-sensor_axle_alignment_1-1-768x1024.jpg)
Axle in the right position.